Asbestos analysis: is your lab up to the task?

Hardly a day goes by without us being confronted with asbestos. Think about health risks, the complexity of renovations or the complex legislation to deal with this material.

Asbestos is a naturally occurring fibrous silicate mineral that was already known in ancient times. It was used in the First World War, for instance, as a filter material in gas masks. But it became really popular from the second half of the 20th century with its mass use in construction projects because of its strength and insulating and fire-resistant properties. The material is present in more than 230 different commercially available products.

Health risks of asbestos

Asbestos can cause serious health risks, especially when the fibres are released and inhaled. This can lead to several serious diseases, including asbestosis, lung cancer and mesothelioma. For prevention, protective measures were introduced at European level from the late 1970s, gradually followed by more and more precautionary measures. This led to a total asbestos ban on October 23, 2001.

However, this did not solve the problem. In Europe alone, an estimated 35 million buildings contain asbestos. According to an ambitious plan by the European commission, most of these should be renovated by 2030 as part of the ‘green renovation wave’.

In other words, we have a wave of reconstruction and renovation projects coming our way, in which the safety of workers can only be guaranteed if the presence or absence of asbestos is determined beforehand. Rapid and accurate testing methods are thus more necessary than ever to drastically reduce the annual number of exposures (125 000 000) and work-related deaths (> 100 000), according to WHO estimates.

Asbestos sampling and analysis methods

Samples are collected from demolition or renovation sites as bulk material or air samples. Bulk sampling involves taking a quantity of material from, for example, plaster, mastic or roofing. In air sampling, air is pumped through a filter whereby any particles and possibly asbestos fibers present are collected on a filter.

The following methods are traditionally used in the analysis lab for asbestos detection:

Optical microscopy and derived techniques such as PCM (Phase Contrast Microscopy) and PLM (Polarized Light Microscopy).
Transmission electron microscopy (TEM).
X-ray fluorescence (XRF).

But there are also certain drawbacks and limitations associated with these techniques:

Optical microscopy often has limitations in terms of resolution and does not have the capability to perform chemical analysis. TEM does not have these limitations but is a very expensive and time-consuming technique. XRF can assist in analyzing materials for chemical composition, but only at high concentrations.

The demand for higher speeds, more automation, and better resolution has led to scanning electron microscopy (SEM) becoming an increasingly popular technique in the asbestos analysis lab.

SEM as a test method for asbestos

Although the prescribed standards, regulations, and accepted test methods still vary across different European countries, it increasingly seems clear that electron microscopy (SEM) will become the standard for asbestos detection.

The new European directive (EU) 2023/2668 mandates a reduction in the detection limit and requires that laboratories transition to electron microscopy within six years of the directive’s enactment. In Belgium, for example, this change will be incorporated into national legislation by December 20, 2025. This means that labs currently using light microscopy will need to prepare for this transition.

Thermo Scientific Phenom XL SEM with Asbestoscan software

The Thermo Scientific Phenom XL SEM is a typical example of an electron microscope that fully complies with this new legislation and is already in use for asbestos analysis in several countries such as Italy, Switzerland, and Germany.

Why Phenom Desktop SEM is the ideal solution:

The combination of the Phenom Desktop SEM with the specialized AsbestoScan 2.0 software offers your lab a fast and accurate solution for asbestos analysis. EDX detection significantly speeds up the analysis process and minimizes human error.

No labor-intensive asbestos fiber identification thanks to the advanced AsbestoScan 2.0 software and an integrated EDX detector. This software is specifically developed for the detection and analysis of asbestos fibers on air filters and bulk samples. It offers a user-friendly interface for SEM and EDX-analysis, ensuring a consistent and efficient workflow that complies with ISO standards such as 14966.
Faster and more accurate analyses than traditional methods: With the help of the built-in energy-dispersive X-ray spectroscopy (EDS) detector, the AsbestoScan 2.0 allows the analyst to do the final verification of the fiber’s nature, allowing faster and more accurate analysis.

Easy integration into and standardization of existing workflows: The analysis of asbestos fibers, as specified in the ISO 14966 standard, is traditionally a lengthy and complex process. With the AsbestoScan Software, up to nine filters can be analyzed, detecting candidate fibers. This significantly reduces manual workload.

What does this mean for your lab? The new regulations are coming, and the question is: is your lab ready for this? We are here to assist you with a smooth and timely transition to SEM technology.